Cooktop Operating Instructions
Setting the Controls - Zone Smart™
1.Touch element display once. The display fl ashes 0
2.Touch desired cook setting
If a selection is not made within 5 seconds, the Element will shut off
To turn off the Zone Smart™ featuref you want to use glass ceramic or ceramic cookware Have a pan smaller than 4 inches, or do not want to use the pan detection / sizing feature, you can turn off The Zone Smart™ system
Glass ceramic and metal pans smaller than4inches:1.Place pan on center of element.
2.Touch control pad for element desired.
3.Touch Zone Smart™ pad. Light goes off
4.For single elements, omit this step. For dual elements, touch Pan Size until desired pan size is displayed. See Step 3 below. Setting the Controls
– CEF and CET Models
5.Touch desired heat setting
6.Element starts heating
Metal pans larger than 4 inches:1.Place pan on center of element.
2.Touch control pad for element desired.
3.Touch desired setting
4.Touch Zone Smart™ pad. Light goes off
5.Pan size and heat setting are kept in memory
6.The element starts heating
Setting the Controls - CEF and CET Models
1.Place pan on center of element.
2.Touch the center of the control pad that corresponds to the element desired. The display fl ashes “0” and two lights to the left and right of the display
3.For dual and triple elements, touch the Pan Size pad until desired element size is displayed
One touch of the pad will select the largest element. The display will stop fl ashing and the outer circle stays on
A second touch of the pad will select the small element and the inner circle stays lit
•For the triple element, another touch of the pad and the middle element is selected
•Further touches of the pad will toggle through the selection process
4.Touch desired heat setting. The display shows the heat setting selected and starts heating
5.To turn off a surface element, touch the element display area twice OR…
To turn off all elements at the same time, touch the Power Pad
English 8