Thermador SC272, SC301 WhatYouWill Hear And See, What You Will Hear, What You Will See, 5 0 c

Models: SC302 SC272 SCD272 SC301

1 40
Download 40 pages 58.4 Kb
Page 10
Image 10
WhatYouWill Hear And See

S Oven Care and Use Manual

Oven Functions

WhatYouWill Hear And See

WHAT YOU WILL HEAR

WHAT YOU WILL SEE

Convection Fan – Operates during any convection mode. It turns off if the door is opened.

Component Cooling Fan – Activates during any cooking or self-cleaning mode to cool electronic components and outer door surfaces. It will stay on until components have cooled sufficiently. This air is exhausted through the vent located below the oven.

Oven Audible Signals – Beeps & Chimes

1.Pad Touch Response: A single short beep whenever a function or number is pressed.

2.Invalid Entry: Three short beeps.

3.Self Clean is Selected and Door is Not Closed: Four short beeps.

4.Indicates a Failure: Continuous series of long beeps.

5.Preheat tone: Single non-repeating chime.

6.One minute left on timer: Single non-repeating chime.

7.Timer Has Counted Down To Zero: Four chimes, one second apart followed by two chimes, one second apart every 30 seconds up to 5 minutes.

8.End of Timed Cooking Cycle: Four chimes, one second apart followed by one chime every 60 seconds for up to 10 minutes.

Control Panel Flashing – Any flashing in the control window indicates the selected function is not completely programmed and requires another step.

Power-up Flashing – The Clock Time flashes following the initial application of power to the unit or after a power failure.

Illuminated Numbers – These numbers indicate Time of Day, Time to Cook, Timers, or Tempera- ture. Digits will move to the left as new digits are entered. Temperatures in Fahrenheit will adjust to the nearest 5°F.

Illuminated Lock – When the word "LOCK" is displayed, the door will not open. Wait for the word to disappear, designating the automatic door latch is in the open position.

Err – Flashes if invalid oven temperatures or times are entered.

F Numbers – Various error codes of F1 to F9, FC, FF, F- and Fr may appear if there is a problem; please consult "Solving Operational Problems," Page 36.

C – Will appear if Centigrade format is selected, see Page 32.

1and 2 – Indicate Timer 1 and Timer 2.

CONTROL PANEL DISPLAY WINDOW

HR

 

 

 

 

3

5 0 c

 

 

 

 

 

DELAY START COOK TIMED

CONVECT BAKE ROAST

CLEAN

BROIL

4 :

4 5

 

PREHEAT ON¡

STOP TIMER

1 2

U

L

0VEN

LOCK

 

 

 

 

 

 

 

Page 8

Page 10
Image 10
Thermador SC272 WhatYouWill Hear And See, What You Will Hear, What You Will See, Oven Audible Signals - Beeps & Chimes