•If you want to stop monitoring data from your Bodylink® sensors, hold the DISPLAY button down until the message HOLD TO SHUT OFF RCVR is displayed on the watch display. Continue holding the DISPLAY button for a few more seconds; the watch will beep indicating that the radio link between the watch and the sensors has been shut down.
TIP: If you are already viewing data from one sensor, for example, the Heart Rate Sensor, and you wish to also view data from the Speed + Distance Sensor, simply press and hold the DISPLAY button until the watch emits a short beep and the antenna icon begins flashing. The watch is now searching for a second Bodylink® sensor. When it detects this second device, the antenna icon will stop flashing and the display may change to a new format that includes the new information. Press and release the DISPLAY button (as detailed previously) to view various combinations of two sensor’s data.
14
Messages
When using the Watch with the Fitness Sensors, the Watch may display messages to communicate the status of either of the Sensors in conjunction with the Watch. Messages include:
NO DATA FROM HRM (GPS) The Watch is not receiving data from either the HR or
NOISY DATA FROM HRM (GPS) The Watch is experiencing radio interference. Try to move away from any potential sources of interference (for example, televisions, monitors, or motorized devices). The Watch will attempt to establish a connection for
30 seconds after this message displays.
SEARCHING The
WEAK GPS SIGNAL The
FATAL GPS ERROR The
15
