Time of Day Mode tips & tricks
➤ You can return to Time of Day Mode from any other mode on the |
Watch by pressing and holding MODE until the time of |
day displays. |
➤ The Watch does not automatically adjust for Daylight Savings |
Chronograph Mode
Chronograph Mode operates as the main workout data center for your Watch. It can record elapsed time for up to 100 hours. It can also register data from the Fitness Sensors for up to 100 laps.
Time. When switching between Standard Time and Daylight |
Savings Time, you must manually adjust the hour value. |
➤ If the Watch does not detect either of the Fitness Sensors, the day |
of the week will appear on the bottom line of the display. |
➤ You can only reset the seconds value to zero if you use the Watch |
in conjunction with the HR Sensor. |
➤ You may adjust the minutes value ahead or behind the correct |
time and the watch will remember your setting. This feature |
helps people who like to set their watches a little ahead to keep |
INDIGLO®
To Vertical Mode or hold for time
Start timing or take a split
View performance 
data
Swap upper and middle lines
Stop or reset the chronograph
them on time. |
Time of Day Mode example
Assume that you live in San Francisco and work with a client in Singapore. Like all busy people, it is imperative you keep track of time, so you set T1 to your local time. But it is also important to have a quick reminder of your client’s time, so you set T2 to Singapore time. With both time zones available, you can quickly check your client’s time or even switch your monitor to display T2 when you travel to Singapore.
Chronograph Mode terminology
Chronograph: The chronograph records time segments for the duration of your activity.
Lap: Lap time records the time for one segment of your activity.
Split: Split time records the total elapsed time since the beginning of your current activity.
Taking a split: When you take a split, the chronograph will complete timing one lap and begin timing a new one.
24 | 25 |
