COMPASS HAND ADJUSTMENT
Pull CROWN all the way out. Compass hand should point to 12 o’clock. If it does not, press either A or B to move compass hand until it points to 12 o’clock. Hold button to move hand fast. Push CENTER CROWN in when done and recalibrate compass.
compass calibration
Before use, the compass must be calibrated.
Since a compass uses the earth’s magnetic field, you must be aware of large metallic objects, such as vehicles or bridges, or objects that give off electromagnetic radiation, such as televisions or computers, which could affect the magnetic field around the watch. If the compass is calibrated near such objects, it will only work properly in that same location. If the compass
is calibrated away from such objects, it will not work
properly near them. For best results, calibrate in the area of intended use.
In calibrating and taking headings, it is important, as with all compasses, to keep the compass level. Calibrating or taking a heading when the watch is not level can result in large errors. Also avoid areas that may exhibit higher than normal concentrations of hard and soft iron, as they may cause inaccurate headings. Whenever a heading is suspect, recalibrate.
Do not store the watch near any source of magnetism, such as a computer, appliance, or television, as the watch can take on a magnetic charge, yielding inaccurate headings. Typical accuracy of
46 | 47 |
