
Using the telephone
3.12Locating a handset (Paging function)
4GHI
5JKL
6MNO
1Press the paging key on the base.
All handsets registered with the base will ring.
2Press any key on the handset to stop the ringing.
3.13Redial memory
You can redial up to 10 of the last numbers called. If you have stored a name in the phonebook to go with the number, the name will be displayed instead.
1 Press the redial key.
2 Select a number. If the number is in the phonebook, the name will be shown.
When the name is displayed, you can toggle between the name and the number by pressing the OK key!
3 Press the
4 Press the
3.14Using the alphanumerical keypad
With your telephone, you can also enter alphanumeric characters. This is useful for entering a name into the phonebook, giving a name to the handset, ...
To select a letter, press the corresponding key as many times as necessary.
For example, to select an ‘A’, press ‘2’ once. To select a ‘B’, press ‘2’ twice and so on.
To select ‘A’ and then ‘B’ consecutively, press ‘2’ once, wait until the cursor moves on to the next character, then press ‘2’ twice.
Press ‘1’ to select a space.
Press the delete key to delete a character.
The keypad characters are as follows:
Key | First | Second | Third | Fourth | Fifth |
| press | press | press | press | press |
1 | space | - | 1 |
|
|
2 | A | B | C | 2 |
|
3 | D | E | F | 3 |
|
4 | G | H | I | 4 |
|
5 | J | K | L | 5 |
|
6 | M | N | O | 6 |
|
7 | P | Q | R | S | 7 |
8 | T | U | V | 8 |
|
9 | W | X | Y | Z | 9 |
0 | 0 |
|
|
|
|
8