Toshiba 4511 manual Scan Once/Copy Many, Job Reservation, Convenient Electronic Sorting

9

COPIER FEATURES

Scan Once/Copy Many

When using Scan Once/Copy Many, an original is scanned only once. The image is stored as digital data in the machine memory and output is produced from this stored image, rather than through continual scanning of the original as with analogue copiers. Originals can therefore be retrieved immediately after scanning, and the original of the next copy job can be placed on the RADF. Scan Once/Copy Many also reduces noise and excess power consumption which results from multiple scanning.

Job Reservation

The e-STUDIO3511/4511 provides an advanced Job Reservation capability. This function enables users to use Pre-Scan for copy, scan or optional fax jobs during another printing or copying as the concurrent process works independently of printing and scanning, without waiting time at the machine. It is possible to reserve up to five different jobs, each of which will start automatically as the previous job finishes. This improves overall productivity and convenience in conjunction with the benefits gained from the Auto Job Start capability.

Convenient Electronic Sorting

Electronic sorting stores images to memory and then outputs documents copies in order, on demand. This feature improves convenience for users. Moreover, the following additional two functions are available.

•Alternation — With A4/Letter or A4-R/Letter-R paper fed in the machine, each Copy/Print set is alternately stacked vertically and horizontally in the Inner Exit Tray, making it easier to separate outputs.

•Magazine Sort — Double sided, two page spread Copy/Print sets can be produced in proper magazine order, providing fast and efficient magazine page layout. A combination of the optional Saddle-stitch Finisher and magazine sorting allows you to create an attractive booklet easily and automatically.

Energy Saving Functions

The e-STUDIO3511/4511 minimizes power consumption with the following energy saving functions:

•Auto Energy Saver — This function automatically lowers the fuser unit temperature to stand by with the minimum power consumption when the machine is not being used for a selectable period of time (3 - 60 minutes).

•Auto Sleep Mode — This function automatically cuts off unnecessary electricity to the fuser unit when the machine is not being used for a selectable period of time

(3 - 240 minutes).

•Weekly Timer — The Weekly Timer function allows users to set an automatic start up or shut down time for the unit for each weekday. Taking advantage of the Weekly Timer function eliminates energy waste caused by users who forget to turn off the unit when leaving the office.

These energy saving capabilities can reduce power consumption and cut electricity costs drastically.