Toshiba 4511 Optional Finishers, Optional Hole Punch Unit, Finisher Types and Staple Positions

5

GENERAL FEATURES

Optional Finishers

The optional Finishers increase the speed and efficiency of making multiple copy/print sets and simplify complex jobs to produce professional looking documentation. Three types of optional Finishers are available: a Hanging type Finisher MJ1022*, a Multi-staple Finisher MJ1023 and a Saddle-stitch Finisher MJ1024.

When the e-STUDIO3511/4511 is used on the network, copies are ejected onto the upper tray and printouts onto the lower tray by default. When adding the optional Fax Board, incoming faxes print to the Central Output Tray.

* The Hanging type Finisher MJ1022 is only available for the e-STUDIO3511.

The Finishers deliver outstanding performance in combination with a variety of finishing related modes, as follows:

Finisher Types and Staple Positions

• MJ1022 — Hanging type Finisher

45 35

AA

•MJ1023 — Multi-staple Finisher

45 35

A A A A A A

45 30

•MJ1024 — Saddle-stitch Finisher

45 35

	A	A	A		A	A		A
* Sort/Group — This function is available for all three Finishers.
				45			35
Collated or grouped sets of copies/prints can be made.

A B

•Staple — This function is available for all three Finishers. Copy/Print sets can be stapled automatically.

•Cascade — This capability is available for all three Finishers. When making a large number of copies/prints, if the first bin becomes full, documents will automatically be fed into the second bin. When the second bin also becomes full, and if the first bin is already empty, documents will automatically be fed back into the first bin.

•Offset — This capability is available for all three Finishers. Sorted copy/print sets are separated by slightly offsetting alternate sets toward the front of the tray.

•Saddle-stitch— This function is available exclusively for the Saddle-stitch Finisher MJ1024. The Saddle-stitch mode staples at the center and folds magazine-sorted outputs.

Optional Hole Punch Unit

The Hole Punch Unit is available only when the Multi-staple Finisher MJ1023 or Saddle-stitch Finishers MJ1024 are installed. Holes are punched in a set of outputs automatically to make it easier to bind the document.

It increases the productivity of punching holes in sets of copied/printed document drastically.

* The number of holes punched and their positions vary by region.