STANDARD ECONOMICAL INTERNET FAX
The e-STUDIO3511/4511 comes standard with the Internet FAX function. The concept of Internet Fax is to transmit or receive the fax data using the IP network, including the Internet or intranet, as a part of or as the entire transmission path. Internet Fax also refers to a device, service or software that is capable of transmitting or receiving a fax over the IP network. With the e-STUDIO3511/4511, users can access the Internet Fax mode simply by pressing the FAX key on the Control Panel.
On Ramp/Off Ramp Gateway Functions
Not only can the e-STUDIO3511/4511 send and receives faxes via fixed phone lines, it can also make use of the Internet to increase cost effectiveness. The On Ramp Gateway function allows documents to be received from F-code compatible G3 faxes and disseminated to other Internet fax machines or PCs. The Off Ramp Gateway function, on the other hand, allows faxes to be received via the Internet and relayed to other fax machines through the public switched telephone network. This convenient function allows local faxes to be sent at local phone rates, and long distance rates can be avoided through use of the Internet. Both On Ramp and Off Ramp functions can be configured to run simultaneously.
EFFICIENT NETWORK FAX
The network fax allows users to fax a document directly from the client PCs. When the document is created, the e-STUDIO3511/4511 print driver is used to send the document. Instead of being printed, it is directly transmitted to specified destinations over the network and/or phone line.
The Address Book Viewer allows the users to add frequently used email addresses and dialed fax numbers to the address book.
Note : The optional FAX Board is required for walk-up Fax via phone line
OPTIONAL WALK-UP FAX (SUPER G3/G3)
The e-STUDIO3511/4511 can operate as a multi-featured facsimile, designed to provide high-speed transmission and reduction in communications costs. The table below describes other functions which increase convenience and usability in FAX mode.
Super G3 Fax
When the optional FAX board is installed, the e-STUDIO3511/4511 can serve as a Super G3 facsimile with a 33.6 Kbps fax modem compatible with ITU-TV.34 to transmit or receive a fax almost twice as fast as a G3 facsimile can. That results in significant reductions in communications costs, particularly for long distance faxing.
2nd Line Option
With the optional 2nd line installed, users can start transmitting a fax before an incoming fax is completely received. The 2nd line can be dedicated for reception only if required and can be configured to be used for peak periods.
JBIG data compression
The e-STUDIO3511/4511 supports JBIG data compression. This image compression format substantially decreases transmission time, compared to conventional data compression methods. JBIG is particularly efficient when transmitting a fax containing a lot of grayscale images or photographs, result in a cut of transmission time and costs.
Memory capacity
High demands for fax communication are easily managed by the e-STUDIO3511/4511 with its standard large capacity memory of 240 MB for transmission and 120 MB for reception.
Versatile Transmission/reception methods
•Direct Transmission — The destination facsimile is dialed immediately, and a fax can be transmitted while being scanned.
•Memory Transmission — A fax automatically starts transmission after it is temporarily stored in the memory.
•Delayed Transmission — A fax is transmitted to a specified destination facsimile at a specified time, programmed up to one month in advance.
•Quality Transmission — When there is excessive line-noise present, this mode can be enabled to slow down the transmission rate and ensure that the fax can be received at the destination successfully.
