Toshiba 5105 Using external display devices

51
Getting Started
Using external display devices
5.375 x 8.375 ver 2.4.0
See your printer documentation for additional configuration
steps, or see “Setting up a printer” on page 76.
Using external display devices
Your computer comes with a built-in LCD display, but you
can easily attach an external monitor to your computer if you
need a larger screen. To do this:
1Turn off the computer.
2Connect the monitor’s video cable to the RGB (monitor)
port on the left side of the computer.
3Connect the monitor’s power cable to a live electrical
outlet.
4Turn on the external monitor.
5Turn on the computer.
6Set the display mode by pressing Fn + F5, or by setting the
Display Properties settings.
Directing the display output when you turn on the computer
Once you’ve connected an external display device, you can
choose to use the internal display only, the external device
only, or both simultaneously. The quickest way to change the
display output settings is to use the display hot key (Fn + F5).
1While holding down Fn, press F5 repeatedly until the
setting you want takes effect.
This hot key cycles through the settings in the following
order:
❖Built-in display panel only
❖Built-in display panel and external monitor
simultaneously
❖External monitor only