ICC
parameter subgroups (if any) contained in that parameter group are displayed in the Parameter Subgroup Selection List (refer to section 10.4.3), and the corresponding parameters are displayed in the Parameter List (refer to section 10.4.4). The following parameter groups are available:
All: All parameters are available (configuration, command and monitor parameters).
Basic Parameters: Only
the configuration parameters most commonly used for drive setup are available.
Extended Parameters: All other configuration parameters that are not
“basic parameters” are available.
Command Parameters: Only drive command parameters are available. Note that although all parameters associated with drive control are available in this selection, only those parameters that are identified as being for the “internal option board” can be used to actually control the drive via the option board: all other drive command parameters can only be monitored via the option board.
Monitor Parameters: Only drive monitor parameters are available.
10.4.3 Parameter Subgroup Selection List
Subgroups can be used to further filter the parameters of a group that are to be displayed in the Parameter List. Refer to Figure 12.
If the group currently selected in the Parameter Group Selection List (refer to section 0) has subgroups available, then choosing
the desired subgroup will further filter the parameters that are displayed in the Parameter List. If the
27