TROUBLESHOOTING
Section C
Remove the misfed original from the exit area.
If the misfed original cannot be easily removed from the exit area, open the moveable part of the document feeder tray and remove the original.
2 Open and close the SPF to make the misfeed location indicator stop blinking.
You can also make the misfeed indicator stop blinking by opening and closing the feeding roller cover or the right side cover.
3 Return the originals indicated by the minus number in the display to the document feeder tray and press the [START] key (
).
Copying will resume from the originals that still remained when the misfeed occurred.
MISFEED IN THE BYPASS TRAY
1 Gently pull the misfed paper out.
2 Open and close the side cover.
The misfeed indicator (
) will go out.
• | When closing the side cover, press down |
Note | on the handle. |
•If the misfeed indicator (
) does not stop blinking, check for torn pieces of paper in the machine.
48
