Sharp AR-5320, AR-5316 Selecting A Setting For A User Program, Base settings, Press the START key

USER SETTINGS

SELECTING A SETTING FOR A USER PROGRAM

1 Hold down the [Light] key ( ) until the alarm indicators (, , , , ) blink.

The display shows "- -" with the left hyphen blinking.

1 3 5

2 Enter the program number with the numeric keys.

• See "USER PROGRAMS" (p.33 to p.34) for the program numbers.

• The selected program number blinks.

• For example, to select "Auto clear timer", press the [1] key.

If you enter the wrong number, press the

Note	[CLEAR] key (	) and then enter the correct
	number.

3 Press the [START] key ( ).

• The selected program number stops blinking and lights steadily.

• The currently selected setting code blinks on the right side of the display.

4 Enter the desired setting code by pressing a numeric key.

•For the setting codes, see "USER PROGRAMS". (p.33 to

p.34)

• The selected setting code blinks.

• For example, to select 90 seconds, press the [5] key.

Note If you enter the wrong number, press the

[CLEAR] key ( ) and return to step 2.

5 Press the [START] key ( ).

The selected setting code stops blinking and lights steadily.

4

To select a setting for another user program,

Note	press the [CLEAR] key (	) and then return
	to step 2.

6 Press the [Light] key ( ) to complete the settings.

The alarm indicators ( , , , , ) go off and the display returns to the number of copies display.

Audible signals (key entry beep, invalid key beep, base setting beep)

The machine sounds three different types of beep signals: a key entry beep that sounds when a valid key is pressed, an invalid key beep that sounds when an invalid key is pressed, and a base setting beep that sounds when a setting is the same as the base setting (base settings are explained below). The base setting beep is initially disabled. If you wish to enable the base setting beep, see "Base setting beep signal" on page 34. If you wish to change the volume of the beep signals or disable them, see "Audible signals volume" on page 34.

The beep patterns of each type of beep signal are as follows:

Key entry beep	One beep	Base setting beep	Three beeps
Invalid key beep	Two beeps

Base settings

The base settings are preset standard selections for each copy setting. The base settings are as follows:

Copy ratio	100%
Light and Dark indicator	........................ 3
Paper feed location	Upper paper tray

ORIGINAL SIZE	A4 (8-1/2" x 11")
AUTO/TEXT/PHOTO ( AUTO /		/ )
............................................................		AUTO

35