Sharp AR-5320 X, AR-5316 X operation manual Customising Settings, User programs, User Programs

CUSTOMISING SETTINGS

(User programs)

The user programs allow you to customise the machine to match your needs.

USER PROGRAMS

Program		Setting codes
	Program name	(factory default setting			Explanation
number
		appears in bold)
		1: OFF	•	"Auto clear time" automatically returns the
		2: 10 sec.		copy settings to the initial settings (p.12) when
1	Auto clear time	3: 20 sec.		a certain period of time elapses after a copy is
		4: 60 sec.		made. This program is used to select the
		5: 90 sec.		period of time. "Auto clear time" can also be
		6: 120 sec.		disabled.
			•	This function automatically switches the
		1: 1 min.		machine to a low power consumption state if
				the set duration of time elapses without the
		2: 5 min.		machine being used when the power is on.
2	Preheat mode	3: 30 min.		The POWER SAVE indicator ( ) lights up,
		4: 60 min.		however, the keys on the operation panel can
		5: 120 min.		be used. Normal operation automatically
		6: 240 min.		resumes when a key on the operation panel is
				pressed, a print job is received or an original is
				placed.
			•	This function automatically switches the
				machine to a state that consumes even less
				power than preheat mode if the set duration of
		1: 5 min.		time elapses without the machine being used
				when the power is on. All lights except the
		2: 30 min.
	Auto power shut-off			POWER SAVE indicator ( ) and ON LINE
3		3: 60 min.
	timer			indicator ( ) go off. To resume normal
		4: 120 min.
				operation, press the [START] key (		).
		5: 240 min.
				Normal operation also resumes automatically
				when a print job is received. While in auto
				power shut-off mode, no keys (except the
				[START] key (	)) can be used.
			•	When copying using the SPF, during the
		0: OFF		period of time that the SPF indicator blinks
4	Stream feeding mode*1			after an original has been scanned
		1: ON		(about 5 seconds), a subsequent original can
				be placed and automatically fed into the
				machine.
5	Auto power shut-off	0: OFF	•	Use this setting to enable or disable auto
	setting	1: ON		power shut-off.
			•	This function automatically selects paper that
8	Auto paper select	0: OFF		is the same size as the original placed in the
				SPF, or the same size as that selected with
	mode*2	1: ON
				the [ORIGINAL SIZE ENTER] key (ENTER ) The
				function can be disabled.
			•	If the paper runs out during printing and there
	Auto tray switching*2	0: OFF		is paper of the same size and orientation in
9				another tray, this function automatically
		1: ON
				switches to that tray (excluding the bypass
				tray). The function can be disabled.
10 to 15	Auditing mode	–	See "AUDITING MODE SETTINGS" (p.36).

*1 When the SPF is installed.

*2 On model with the two trays.

4

33