Manuals / Sharp / Computer Equipment / Copier

Sharp AR-5320 X, AR-5316 X operation manual Operation Panel

Models: AR-5316 AR-5316 X AR-5320 AR-5320 X

1 72

Download 72 pages 40.76 Kb

Page 12

OPERATION PANEL

BEFORE USING THE MACHINE

OPERATION PANEL

1 2 3

The indications of the operation panel may differ depending on the country and the region.

AR-5316/
AR-5316 X
18	21

The example of a display of inch series

				200%
	11X17			141
	11X17			129
	8½X14			129
	8½X14			121
	8½X11			121
	8½X11			100%
	8½X5½			100%
	8½X5½			95
	8½X11			95
	8½X11			77
	8½X13			77
	8½X13			64
	EXTRA			50%
15	16	18	21	22

1ON LINE key () / indicator

Press to toggle the machine between online and off-line. The indicator lights up when the machine is online, and goes off when the machine is off-line. The indicator blinks while the machine is receiving print data and while printing is paused. (p.29)

2DUAL PAGE COPY key () / indicator Use to make individual copies of the two pages of an open book or other two-page original. (p.27)

3XY-ZOOM key () / indicator

Press to change the horizontal and vertical copy ratios independently. (p.24)

4AUTO/TEXT/PHOTO key ( AUTO / / ) / indicators

Use to select the exposure mode: "AUTO", "TEXT", or "PHOTO". (p.21)

5AUDIT CLEAR key ( ACC.#-C) Closes an open account. (p.39)

6AUTO PAPER SELECT indicator (AUTO ) Paper of the proper size will be automatically selected depending on the original size and selected copy ratio when this indicator is on. (p.20)

7Alarm indicators

[ ] Maintenance indicator (p.46)

[ ] Toner cartridge replacement required indicator (p.46)

[ ] Developer replacement required indicator (p.46)

[ ] Paper required indicator (p.46)

[ ] Misfeed indicator (p.46)

8POWER SAVE indicator ()

Lights up when the machine is in a power save mode. (p.12)

9Display

Shows the set number of copies, as well as the copy ratio, user program function or setting code, or an error code when an error occurs.

10Copy ratio display key ()

Hold down when the machine is not in use to display the copy ratio in the display. (p.24)

11ZOOM indicator

Lights up when a zoom ratio is set. (p.24)

12Zoom keys (, )

Use to select any reduction or enlargement copy ratio from 25% to 400% in increments of 1%. (p.24)

13INTERRUPT key ( ) / indicator Interrupts a copy run. (p.28)

14Light and Dark keys ( , ) / indicators

Use to adjust the TEXT or PHOTO exposure level. (p.21)

15ORIGINAL SIZE ENTER key (ENTER ) / ORIGINAL

SIZE indicators

Use to enter the original size. (p.16) The selected original size will light up.

10

Image 12

Sharp AR-5320 X, AR-5316 X operation manual Operation Panel

Contents

AR-5316 AR-5320 AR-5316 AR-5320 Money CONTENTS 1 BEFORE USING THE MACHINEUSER SETTINGS 5 TROUBLESHOOTINGROUTINE MAINTENANCE SPECIFICATIONSPERIPHERAL DEVICES AND SUPPLIES APPENDIXCAUTIONS ON USING IMPORTANT POINTS WHEN SELECTING AN INSTALLATION SITECAUTIONS Do not install your machine in areas that areCAUTIONS ON HANDLING CAUTIONS ON LASERENVIRONMENTAL INFORMATION Trademark acknowledgementsUSING THE MANUAL ABOUT THE OPERATION MANUALSTHE MEANING OF R IN ORIGINAL AND PAPER SIZE INDICATIONS CONVENTIONS USED IN THIS MANUALDIFFERENCES BETWEEN MODELS AB series metric and inch series referencesMAIN FEATURES Enhanced copying featuresHigh-speed laser copying High-quality digital imagePART NAMES AND FUNCTIONS ChapterBEFORE USING THE MACHINE BEFORE USING THE MACHINE The fusing unit is hot. Do not touchthe fusing unit when removing misfed paper. Doing so may cause a burn orOPERATION PANEL Light up to show the selected copy paper size. p.16 POWER ON AND OFF POWER ONPOWER OFF Power Save ModesLOADING PAPER PAPERSpecial papers LOADING PAPER Loading the paper tray1 Gently lift and pull out the paper tray until it stops 5 Gently push the paper tray into the machineImportant points when inserting paper in the bypass tray Loading the bypass tray1 Unfold the bypass tray 3 Insert the paper print face down all the way into the bypass trayCHANGING A TRAY’S PAPER SIZE SETTING Envelopes3 Use the ORIGINAL SIZE ENTER key ENTER to select the paper size Important points when using the printer mode 5 Press the START key and then the PAPER SIZE ENTER keyCOPY FUNCTIONS NORMAL COPYINGChapter Copying from the document glass2 Adjust the original guides to the size of the originals Copying from the SPF5 Press the START key to begin copying 3 Set the originals face up in the document feeder trayAuto paper select mode Two-tray model only Stream feeding modeRemoving the document cover Originals that can be used in the SPFMAKING A COPY DARKER OR LIGHTER SELECTING THE TRAYAuto tray switching Two-tray model only to adjust the exposureSETTING THE NUMBER OF COPIES REDUCTION/ENLARGEMENT/ZOOMAUTOMATIC RATIO SELECTION MANUAL RATIO SELECTION 4 Press the AUTO IMAGE key AUTO %SELECTING THE VERTICAL AND HORIZONTAL COPY RATIOS SEPARATELY XY ZOOM copying3 Press the XY-ZOOM key 5 Press the Copy ratio display keycopy settings, and then press the 7 Press the Copy ratio display keySet the number of copies and other START keyTWO-SIDED COPYING USING THE BYPASS TRAY 1 Copy original A2 Place original B as shown below DUAL PAGE COPYING PAGE COPY indicatorSet the original size to A3 11 x Press the DUAL PAGE COPY keyINTERRUPTING A COPY RUN Interrupt copying1 Press the INTERRUPT key to interrupt the copy run 5 Replace the previous originals and press the START keyUSING THE PRINTER MODE BASIC PROCEDURE FOR PRINTINGPRINTER FUNCTIONS 2 Make sure that the ON LINE indicator on the operation panel is litOPERATION IN COPY AND PRINTER MODES Pausing a print jobWhen Use close paper size is disabled When Use close paper size is enabledUSER SETTINGS ADJUSTING THE AUTOMATIC EXPOSURE LEVELkey AUTO / / until the AUTO indicator AUTO blinks 5 Press the AUTO/TEXT/PHOTO key AUTO // to complete the settingTONER SAVE MODE AND HIGH IMAGE QUALITY MODE key AUTO / / until the PHOTO indicator blinks4 Press the AUTO/TEXT/PHOTO key AUTO / / to complete the setting 1 Press the AUTO/TEXT/PHOTO key AUTO / / to select TEXTCUSTOMISING SETTINGS User programsUSER PROGRAMS 3 AR-5316/AR-5316 X is as follows 1 Paper tray factory default 5 Bypass traySELECTING A SETTING FOR A USER PROGRAM Audible signals key entry beep, invalid key beep, base setting beepBase settings 4 Enter the desired setting code by pressing a numeric keySETTINGS FOR AUDITING MODE AUDITING MODEAUDITING MODE SETTINGS SELECTING AUDITING MODE SETTINGS 5 Press the Light key to complete the settings2 Enter the program number with the numeric keys 3 Press the START keyAuditing mode 3 When finished, press the CLEAR key3 When finished, press the CLEAR key Account number entryResetting account Copying when Auditing mode is enabled3 When finished, press the AUDIT CLEAR key ACC.#-C Resetting all accounts Press the 1 key and then press the START keyTROUBLESHOOTING TROUBLESHOOTINGMACHINE/COPYING PROBLEMS PRINTING PROBLEMSMACHINE/COPYING PROBLEMS TROUBLESHOOTINGTROUBLESHOOTING When the SPF is installed→ To remove the misfeed, see MISFEED REMOVAL → Use copy paper within the specified rangeTROUBLESHOOTING → Clean regularlyPRINTING PROBLEMS TROUBLESHOOTINGTROUBLESHOOTING Removing the software1 Click the start button, and then click Control Panel 2 Click Add or Remove ProgramsINDICATORS AND DISPLAY MESSAGES When Use close paper size is disabledMISFEED REMOVAL MISFEED IN THE SPF1 Remove the misfed original Section AMISFEED IN THE BYPASS TRAY TROUBLESHOOTING1 Gently pull the misfed paper out 2 Open and close the side coverMISFEED IN THE MACHINE A. Misfeed in the paper feed area1 Open the bypass tray and the side cover 2 Carefully remove the misfed paperB. Misfeed in the fusing area Lower the fusing unit release levers to1 Push gently on both ends of the front cover 2 Turn the roller rotating knob in the direction of the arrowC. Misfeed in the transport area 3 Close the side coverMISFEED IN THE UPPER PAPER TRAY TROUBLESHOOTING1 Lift and pull out the upper paper tray and remove the misfed paper 2 Open and close the side coverMISFEED IN THE LOWER PAPER TRAY Two-tray model only 1 Open the lower side cover2 Remove the misfed paper 4 Close the lower side coverREPLACING THE TONER CARTRIDGE 1 Push on both ends of the front cover and open it2 Pull the toner cartridge out while pressing the lock release lever 6 Close the front coverROUTINE MAINTENANCE CHECKING THE TOTAL OUTPUT COUNT AND TONER LEVELCHECKING THE TOTAL OUTPUT COUNT ChapterROUTINE MAINTENANCE CLEANING THE DOCUMENT GLASS AND SPF/ DOCUMENT COVERCHECKING THE TONER LEVEL ROUTINE MAINTENANCECLEANING THE BYPASS TRAY PAPER FEED ROLLER CLEANING THE TRANSFER CHARGER1 Turn the power switch off 2 Open the bypass tray and the side cover 4 Take the charger cleaner out by holding the tabPERIPHERAL DEVICES SINGLE PASS FEEDERSpecifications PERIPHERAL DEVICES AND SUPPLIESSTORAGE OF SUPPLIES PROPER STORAGEStore the supplies in a location that is Store paper in the wrapper and lying flatSPECIFICATIONS APPENDIXChapter Printer Function SOFTWARE LICENSE Page INDEX Toner cartridge replacement required indicator Machine/copying problemsPrinting problems Two-sided copying using the bypass trayMachine settings Auditing modeProblem occurs Indicators, lit and blinkingMEMO CLASS LASER PRODUCT LASER KLASSE LUOKAN 1 LASERLAITE KLASS 1 LASERAPPARATPage SHARP CORPORATION AR-5316/AR-5320/AR-5316 X/AR-5320Printed on 100% post-consumer recycled paper PRINTED IN CHINA