Sharp AR-5320 X, AR-5316 X Press the START key and then the PAPER SIZE ENTER key

BEFORE USING THE MACHINE

4 Squeeze the lock lever of the front guide and slide the front guide to match the width of the paper, and move the left guide to the appropriate slot as marked on the tray.

Left guide

Front guide

•The front guide is a slide-type guide. Grasp the locking knob on the guide and slide the guide to the indicator line of the paper to be loaded.

•The left guide is an insert-type guide. Remove it and then insert it at the indicator line of the paper to be loaded.

•When using 11" x 17" sized paper store the left guide in the slot at the left front of the paper tray.

Important points when using the printer mode

•Make sure that the tray's paper size setting is the same as the tray's paper size setting in the printer driver. For example, if the tray's paper size setting is A4R, set "Setting Paper Size" to "A4-R". For more information, see "CONFIGURING THE PRINTER DRIVER" in the "Software Setup Guide".

1

5 Press the [START] key ( ) and then the [PAPER SIZE ENTER] key ().

To change the paper size setting of another tray, repeat steps 2 to 5 after pressing the [START] key ( ).

Affix the paper size label for the paper size Note selected in step 3 to the label position on the

right end of the tray.

17