Sharp AR-5320 X, AR-5316 X Manual Ratio Selection, Press the AUTO IMAGE key AUTO %

COPY FUNCTIONS

4 Press the [AUTO IMAGE] key (AUTO % ).

The AUTO IMAGE indicator (AUTO % ) lights

AUTO %up and the appropriate ratio for the original size and paper size is selected. (The indicator of the selected ratio will light up.)

•	If the ORIGINAL SIZE indicator blinks,
Note	change the orientation of the placed original.

•If the copy is made when a PRESET RATIO selector indicator is blinking, the copied image may run off the page.

5 Set the number of copies and other copy settings, and then press the [START] key ().

The copy will be delivered to the paper output tray.

Note To cancel automatic ratio selection, press the [AUTO IMAGE] key ( AUTO % ) again.

2

MANUAL RATIO SELECTION

Copies can be reduced down to 25% or enlarged up to 400%. The [PRESET RATIO] selector keys ( , ) can be

pressed to quickly select a ratio from among eight preset ratios. In addition, the [Zoom] keys ( , ) can be pressed to select the ratio in increments of 1%.

1 Place the original(s) in the document feeder tray or on the document glass.

When a [Zoom] key ( or ) is pressed, the ZOOM indicator will light up and the zoom ratio will appear in the display for about two seconds.

2 If the original is placed on the document glass, select the original size. (p.18)

3 Use the [PRESET RATIO] selector keys ( , ) and [Zoom] keys ( , ) to select the desired copy ratio.

•	To verify a zoom setting without changing
Note	the zoom ratio, Hold down the [Copy ratio
	display] key ( ). When the key is
	released, the display will return to the
	number of copies display.

• If the copy is made when a PRESET

RATIO selector indicator or the ZOOM

indicator is blinking, the copied image may

200%

141

122

115

100%

86

81

70

50%

ZOOM 25 400%

Selecting a preset ratio

Press the [PRESET RATIO] selector key ( ) to move up through the preset ratios.

Press the [PRESET RATIO] selector key ( ) to move down through the preset ratios.

Fine adjustment of the ratio

Any ratio from 25% to 400% can be set in increments of 1%.

run off the page. To ensure that the image

fits on the page, lower the copy ratio until

the indicator stops blinking and lights

steadily.

• If the PAPER SIZE indicator is not lit, there

is no appropriate paper. Load appropriate

paper in a paper tray. (p.14)

4 Set the number of copies and other copy settings, and then press the [START] key ().

The copy will be delivered to the paper output tray.

To return the ratio to 100%, press the Note [PRESET RATIO] selector key ( or )

until the 100% indicator lights up.

Press a [PRESET RATIO] selector key ( or ) to set the approximate ratio, then press the [Zoom] keys

( or ) to increase or decrease the ratio.

To decrease or increase the zoom ratio rapidly, hold down the [Zoom] keys ( or ).

23