Sharp AR-5320 X, AR-5316 X Two-Sided Copying Using The Bypass Tray, Copy original A

TWO-SIDED COPYING USING THE BYPASS TRAY

To perform manual two-sided copying, follow these steps.

Example: Copying originals A and B onto each side of one sheet of paper

1 2

Original A Original B

1

Copy

1 Copy original A.

1 1

Copied original A Original A

3 Turn the copy of original A over, and without changing the position of the edge closest to you, insert it in the bypass tray.

Insert the paper all the way in.

1	2	1
		Copied
Original B		original A

1

1

Copied original A Original A

2 Place original B as shown below.

	Vertically-oriented
	original:
	If the original is oriented
2	vertically, place it in the
	same orientation as
	original A.
Original B

1	1
	2

	Copied
Original B	original A

2

Original B

Horizontally-oriented original:

If the original is oriented horizontally, place it with the top and bottom and left and right sides reversed with respect to the placement of original A.

•	Copies made on the back side of paper
Note	should always be made one sheet at a time
	using the bypass tray.

•Straighten curled or wavy paper before using it. Curled paper may cause misfeeds, creases, or a poor-quality image.

4 Select the bypass tray with the [TRAY SELECT] key (), and then press the [START] key ().

The copy is delivered to the paper output tray.

26