Manuals / Sharp / Computer Equipment / Copier

Sharp AR-5320 X, AR-5316 X C. Misfeed in the transport area, Close the side cover

Models: AR-5316 AR-5316 X AR-5320 AR-5320 X

1 72

Download 72 pages 40.76 Kb

Page 53

Image 53

TROUBLESHOOTING

C. Misfeed in the transport area

1 Open the fusing paper guide by pressing down the projection on either side of the guide and remove the misfed paper.

Be careful not to tear the misfed paper during removal.

Warning

The fusing unit is hot. Do not touch the fusing unit when removing misfed paper. Doing so may cause a burn or injury.

2 If the misfed paper cannot be removed by the previous step but is visible in the paper output area, remove the paper by pulling it into the paper output area.

Be careful not to tear the misfed paper during

removal.	5

3 Close the side cover.

The misfeed indicator ( ) will go out.

• When closing the side cover, press on the

Note handle.

•If the paper was torn, make sure that no torn pieces remain in the machine.

•If the misfeed indicator ( ) does not stop blinking, check for torn pieces of paper in the machine.

Page 53

Image 53

Sharp AR-5320 X, AR-5316 X operation manual C. Misfeed in the transport area, Close the side cover

Contents

AR-5316 AR-5320 AR-5316 AR-5320 Money 1 BEFORE USING THE MACHINE CONTENTSUSER SETTINGS 5 TROUBLESHOOTINGSPECIFICATIONS ROUTINE MAINTENANCEPERIPHERAL DEVICES AND SUPPLIES APPENDIXIMPORTANT POINTS WHEN SELECTING AN INSTALLATION SITE CAUTIONS ON USINGCAUTIONS Do not install your machine in areas that areCAUTIONS ON LASER CAUTIONS ON HANDLINGENVIRONMENTAL INFORMATION Trademark acknowledgementsABOUT THE OPERATION MANUALS USING THE MANUALTHE MEANING OF R IN ORIGINAL AND PAPER SIZE INDICATIONS CONVENTIONS USED IN THIS MANUALAB series metric and inch series references DIFFERENCES BETWEEN MODELSEnhanced copying features MAIN FEATURESHigh-speed laser copying High-quality digital imageBEFORE USING THE MACHINE PART NAMES AND FUNCTIONSChapter The fusing unit is hot. Do not touch BEFORE USING THE MACHINEthe fusing unit when removing misfed paper. Doing so may cause a burn orOPERATION PANEL Light up to show the selected copy paper size. p.16 POWER ON POWER ON AND OFFPOWER OFF Power Save ModesSpecial papers LOADING PAPERPAPER Loading the paper tray LOADING PAPER1 Gently lift and pull out the paper tray until it stops 5 Gently push the paper tray into the machineLoading the bypass tray Important points when inserting paper in the bypass tray1 Unfold the bypass tray 3 Insert the paper print face down all the way into the bypass tray3 Use the ORIGINAL SIZE ENTER key ENTER to select the paper size CHANGING A TRAY’S PAPER SIZE SETTINGEnvelopes 5 Press the START key and then the PAPER SIZE ENTER key Important points when using the printer modeNORMAL COPYING COPY FUNCTIONSChapter Copying from the document glassCopying from the SPF 2 Adjust the original guides to the size of the originals5 Press the START key to begin copying 3 Set the originals face up in the document feeder trayStream feeding mode Auto paper select mode Two-tray model onlyRemoving the document cover Originals that can be used in the SPFSELECTING THE TRAY MAKING A COPY DARKER OR LIGHTERAuto tray switching Two-tray model only to adjust the exposureAUTOMATIC RATIO SELECTION SETTING THE NUMBER OF COPIESREDUCTION/ENLARGEMENT/ZOOM 4 Press the AUTO IMAGE key AUTO % MANUAL RATIO SELECTIONXY ZOOM copying SELECTING THE VERTICAL AND HORIZONTAL COPY RATIOS SEPARATELY3 Press the XY-ZOOM key 5 Press the Copy ratio display key7 Press the Copy ratio display key copy settings, and then press theSet the number of copies and other START key2 Place original B as shown below TWO-SIDED COPYING USING THE BYPASS TRAY1 Copy original A PAGE COPY indicator DUAL PAGE COPYINGSet the original size to A3 11 x Press the DUAL PAGE COPY keyInterrupt copying INTERRUPTING A COPY RUN1 Press the INTERRUPT key to interrupt the copy run 5 Replace the previous originals and press the START keyBASIC PROCEDURE FOR PRINTING USING THE PRINTER MODEPRINTER FUNCTIONS 2 Make sure that the ON LINE indicator on the operation panel is litPausing a print job OPERATION IN COPY AND PRINTER MODESWhen Use close paper size is disabled When Use close paper size is enabledADJUSTING THE AUTOMATIC EXPOSURE LEVEL USER SETTINGSkey AUTO / / until the AUTO indicator AUTO blinks 5 Press the AUTO/TEXT/PHOTO key AUTO // to complete the settingkey AUTO / / until the PHOTO indicator blinks TONER SAVE MODE AND HIGH IMAGE QUALITY MODE4 Press the AUTO/TEXT/PHOTO key AUTO / / to complete the setting 1 Press the AUTO/TEXT/PHOTO key AUTO / / to select TEXTUSER PROGRAMS CUSTOMISING SETTINGSUser programs 5 Bypass tray 3 AR-5316/AR-5316 X is as follows 1 Paper tray factory defaultAudible signals key entry beep, invalid key beep, base setting beep SELECTING A SETTING FOR A USER PROGRAMBase settings 4 Enter the desired setting code by pressing a numeric keyAUDITING MODE SETTINGS SETTINGS FOR AUDITING MODEAUDITING MODE 5 Press the Light key to complete the settings SELECTING AUDITING MODE SETTINGS2 Enter the program number with the numeric keys 3 Press the START key3 When finished, press the CLEAR key Auditing mode3 When finished, press the CLEAR key Account number entryCopying when Auditing mode is enabled Resetting account3 When finished, press the AUDIT CLEAR key ACC.#-C Resetting all accounts Press the 1 key and then press the START keyTROUBLESHOOTING TROUBLESHOOTINGMACHINE/COPYING PROBLEMS PRINTING PROBLEMSTROUBLESHOOTING MACHINE/COPYING PROBLEMSWhen the SPF is installed TROUBLESHOOTING→ To remove the misfeed, see MISFEED REMOVAL → Use copy paper within the specified range→ Clean regularly TROUBLESHOOTINGTROUBLESHOOTING PRINTING PROBLEMSRemoving the software TROUBLESHOOTING1 Click the start button, and then click Control Panel 2 Click Add or Remove ProgramsWhen Use close paper size is disabled INDICATORS AND DISPLAY MESSAGESMISFEED IN THE SPF MISFEED REMOVAL1 Remove the misfed original Section ATROUBLESHOOTING MISFEED IN THE BYPASS TRAY1 Gently pull the misfed paper out 2 Open and close the side coverA. Misfeed in the paper feed area MISFEED IN THE MACHINE1 Open the bypass tray and the side cover 2 Carefully remove the misfed paperLower the fusing unit release levers to B. Misfeed in the fusing area1 Push gently on both ends of the front cover 2 Turn the roller rotating knob in the direction of the arrow3 Close the side cover C. Misfeed in the transport areaTROUBLESHOOTING MISFEED IN THE UPPER PAPER TRAY1 Lift and pull out the upper paper tray and remove the misfed paper 2 Open and close the side cover1 Open the lower side cover MISFEED IN THE LOWER PAPER TRAY Two-tray model only2 Remove the misfed paper 4 Close the lower side cover1 Push on both ends of the front cover and open it REPLACING THE TONER CARTRIDGE2 Pull the toner cartridge out while pressing the lock release lever 6 Close the front coverCHECKING THE TOTAL OUTPUT COUNT AND TONER LEVEL ROUTINE MAINTENANCECHECKING THE TOTAL OUTPUT COUNT ChapterCLEANING THE DOCUMENT GLASS AND SPF/ DOCUMENT COVER ROUTINE MAINTENANCECHECKING THE TONER LEVEL ROUTINE MAINTENANCECLEANING THE TRANSFER CHARGER CLEANING THE BYPASS TRAY PAPER FEED ROLLER1 Turn the power switch off 2 Open the bypass tray and the side cover 4 Take the charger cleaner out by holding the tabSINGLE PASS FEEDER PERIPHERAL DEVICESSpecifications PERIPHERAL DEVICES AND SUPPLIESPROPER STORAGE STORAGE OF SUPPLIESStore the supplies in a location that is Store paper in the wrapper and lying flatChapter SPECIFICATIONSAPPENDIX Printer Function SOFTWARE LICENSE Page INDEX Machine/copying problems Toner cartridge replacement required indicatorPrinting problems Two-sided copying using the bypass trayAuditing mode Machine settingsProblem occurs Indicators, lit and blinkingMEMO LUOKAN 1 LASERLAITE KLASS 1 LASERAPPARAT CLASS LASER PRODUCT LASER KLASSEPage AR-5316/AR-5320/AR-5316 X/AR-5320 SHARP CORPORATIONPrinted on 100% post-consumer recycled paper PRINTED IN CHINA