2. PRINTER SETUP
ENGLISH VERSION
2.4 Loading the Media
2.4Loading the Media (Cont.)
WARNING!
The cutter is sharp, so care must be taken not to injure yourself when handling the cutter.
CAUTION!
1.Be sure to cut the backing paper of the label. Cutting labels will cause the glue to stick to the cutter which may affect the cutter quality and shorten the cutter life.
2.Use of tag paper when the thickness exceeds the specified value may affect the cutter life.
Cut mode (Option)
When the optional Cutter Module is fitted, the media is automatically cut. A swing cutter and a rotary cutter are available as an option, but they are used in the same way.
Insert the leading edge of the media into the Media Outlet of the Cutter Module.
Cutter Module
Media Outlet 
Media
13.If the loaded media is direct thermal media (a chemically treated surface), the media loading procedure is now completed. Close the Ribbon Shaft Holder Plate, and turn the Head Lever to Lock position to close. Then, close the Top Cover.
If the media is thermal transfer media, it is also necessary to load a ribbon. Refer to Section 2.5 Loading the Ribbon.
E2- 9
