2. PRINTER SETUP
ENGLISH VERSION
2.9 Setting an Operating Environment
2.9.2 Dump Mode Setting | While “<4>DUMP MODE” is displayed on the LCD Message Display, | ||
| press the [PAUSE] key to enter the Dump Mode. | ||
| In the Dump Mode, data in the receive buffer are printed. Data are | ||
| expressed in hexadecimal values. This operation allows the user to verify | ||
| programming commands or debug the program. | ||
| When “<4>DUMP MODE” appears, press the [PAUSE] key. | ||
|
|
|
|
|
| <4>DUMP MODE |
|
|
| BUFFER |
|
| Use the [FEED] or [RESTART] key to choose a receive buffer to be | ||
| dumped. | ||
[RESTART]
[FEED]
BUFFER |
|
| |
|
|
|
|
|
|
| |
BUFFER | CENTRO. |
| |
|
|
|
|
|
|
|
|
BUFFER | NETWORK |
|
|
|
|
|
|
|
|
|
|
BUFFER | BASIC 1 |
| |
|
|
| |
BASIC Interpreter (Interface → Interpreter buffer) | |||
|
| ||
BUFFER | BASIC 2 |
| |
|
| ||
BASIC Interpreter (Interpreter → Printer buffer) | |||
|
| ||
BUFFER | USB |
| |
|
|
|
|
NOTES:
After selecting the receive buffer, press the [PAUSE] key.
<4>DUMP MODE PRINT ON DEMAND
Use the [FEED] or [RESTART] key to select a printing method.
1.When “ON DEMAND” is selected, it is required to choose a printing method again and press the [PAUSE] key to print the
subsequent data until the all data has been printed.
2 If an error occurs during |
dumping, the printer will display |
[RESTART]
[FEED]
PRINT ON DEMAND
Prints 166 lines of data (approx. 50cm), then stops.
*To print the subsequent data, choose a printing method again and press the [PAUSE] key.
PRINT ALL
an error message and stop |
printing. The error can be |
cleared by pressing the [PAUSE] |
key, and then the display will |
show “<4>DUMP MODE” |
again. |
After a recovery from the error |
the printer will not start printing |
automatically. |
Prints all data in the receive buffer, then stops.
After selecting a printing method, press the [PAUSE] key.
<4>DUMP MODE
NOW PRINTING...
[PAUSE]
<4>DUMP MODE
Turn off the power, and then on.
ON LINE
