2. PRINTER SETUP
ENGLISH VERSION
2.9 Setting an Operating Environment
2.9.1Parameter Setting (Cont.)
(28) Reverse Feed Speed Selection
This parameter is to choose a reverse feed speed.
In the strip issue, the back feed speed of 3”/sec. may cause a shortage of feed amount due to a lack of torque, slippery media surface, etc. In such case, reduce the back feed speed to 2”/sec. to secure the feed amount.
When “<2>PARAMETER SET” appears, press the [PAUSE] key until the following display appears.
<2>PARAMETER SET BACK SPEED STD
Use the [FEED] or [RESTART] key to select a desired option.
[RESTART]
[FEED]
BACK SPEED STD
BACK SPEED LOW
STD: 3 inch/second
LOW: 2 inch/second
After selecting the Back Feed Speed, press the [PAUSE] key.
(29) Maxi Code Specification Selection
This parameter is to choose a Maxi code specification.
When “<2>PARAMETER SET” appears, press the [PAUSE] key until the following display appears.
<2>PARAMETER SET MAXI CODE TYPE1
Use the [FEED] or [RESTART] key to select a desired option.
[RESTART]
[FEED]
MAXI CODE TYPE1
TYPE1: Compatible specification with the
MAXI CODE TYPE2
TYPE2: Specification for specific home delivery company
After selecting a Maxi code specification, press the [PAUSE] key.
