Toshiba CONCEALED DUCK TYPE Outline of specifications Remarks, Control outline Command

5-2. Control Specifications

No.	Item			Outline of specifications						Remarks
1	When power	1)	Distinction of outdoor unit
	supply is reset		When the power supply is reset, the outdoors are distin-
			guished and the control is selected according to the
			distinguished result.
		2)	Setting of indoor fan speed and existence of air direction
			adjustment
			Based on EEPROM data, select setting of the indoor fan							Fan speed (rpm)/
			speed and the existence of air direction adjustment.							Air direction adjustment
2	Operation	1)	Based on the operation mode selecting command from the
	mode selection		remote controller, the operation mode is selected.
			Remote controller			Control outline
				command
				STOP		Air conditioner stops.
				FAN		Fan operation
				COOL		Cooling operation
				DRY		Dry operation
										Ta: Room temp.
				HEAT		Heating operation
										Ts: Setup temp.
				AUTO	• COOL/HEAT operation mode is
					automatically selected by Ta, Ts					To: Outside temp.
					and To for operation.
					• The operation is performed as
					shown in the following figure
					according to Ta value at the first
					time only. (In the range of Ts +
					α –1 < Ta < Ts + α + 1, Cooling
					thermo. OFF (Fan)/Setup air
					volume operation continues.)
					Cooling
			1.0		operation
					Cooling thermo. OFF (Fan)
				Ta˚C Ts + α
					• Setup air volume
				–1.0
					Heating
					operation
			• α is corrected according to the outside temperature.
				Outside temp.		Correction value (α)
				No To			0K			K = deg
				To ≥ 24°C			–1K
				24°C > To ≥ 18°C			0K
				To < 18°C			+1K
				To error			0K
3	Room temp.	1)	Adjustment range: Remote controller setup temperature ( °C )
	control
					COOL/DRY				HEAT	AUTO
				Wired type	18°C to 29°C			18°C to 29°C		18°C to 29°C
			Wireless type		18°C to 30°C			16°C to 30°C		17°C to 27°C

– 27 –