No.

Item

 

Outline of specifications

Remarks

 

 

 

 

13

Frequency

<In case of wired remote controller>

Command frequency is

 

fixed operation

1)

When pushing [CHK] button for 4 seconds or more, [TEST] is

approximately [S7]

 

(Test run)

 

 

 

displayed on the display screen and the mode enters in Test

 

 

 

 

run mode.

 

 

 

2)

Push [ON/OFF] button.

 

 

 

3)

Using [MODE] button, set the mode to [COOL] or [HEAT].

 

 

 

 

• Do not use other mode than [COOL]/[HEAT] mode.

 

 

 

 

• During test run operation, the temperature cannot be ad-

 

 

 

 

justed.

 

 

 

 

• An error is detected as usual.

 

 

 

 

• A frequency fixed operation is performed.

 

 

 

4)

After the test run, push [ON/OFF] button to stop the operation.

 

 

 

 

(Display in the display part is same as the procedure in Item 1.)

 

 

 

5)

Push [CHK] button to clear the test run mode.

 

 

 

 

([TEST] display in the display part disappears and the status

 

 

 

 

returns to the normal stop status.)

 

<In case of wireless remote controller> (Compact 4-way, Concealed Duct type)

1)Turn off power of the set.

Remove the nameplate of the receiver unit and then turn the Dip switch to [Test operation / ON].

2)The test operation starts by [START/STOP] button.

[START], [TIMER] and [READY] LEDs flash during test operation

Under condition of [Test operation / ON], the temperature adjustment is invalid even if using the wireless remote controller. Do not use it at other cases than a test operation because it applies excessive force.

3)Carry out a test operation under anyone mode of HEAT, COOL or FAN operation mode.

The outdoor unit does not operate for approx. 3 minutes after the power supply was turned on and after operation stop.

4)After the test operation, stop the unit by the wireless remote controller and then return Dip switch of the receiver unit to the original position.

(In order to prevent sequential test operation, this receiving unit is attached with 60-minutes timer release function.)

Receiver unit

Spacer

M4 × 25 screw (2 pieces)

Notch Nameplate

Small screw

– 35 –

Page 35
Image 35
Toshiba CONCEALED DUCK TYPE, CEILING TYPE service manual Case of wired remote controller

CONCEALED DUCK TYPE, CEILING TYPE specifications

Toshiba has long been a name associated with innovative and efficient HVAC solutions, and their Concealed Duck Type, Ceiling Type air conditioning units exemplify this legacy. These units are designed to provide exceptional comfort while seamlessly integrating into a variety of interior spaces.

One of the main features of the Toshiba Concealed Duck Type, Ceiling Type system is its discreet installation method. Unlike traditional wall-mounted units, this system is installed within the ceiling, allowing for an unobtrusive appearance. The result is a clean and modern aesthetic, ideal for residential and commercial settings where design is a priority. With only the supply and return grilles visible, the units maintain the integrity of the interior decor.

The technology employed in Toshiba's air conditioning systems revolves around energy efficiency and user comfort. The units are equipped with inverter technology, which allows for precise temperature control and reduces energy consumption. The inverter adjusts the compressor speed to meet the cooling or heating demand, ensuring not only optimal comfort but also reduced operational costs.

Another significant characteristic of the Toshiba Concealed Duck Type units is their quiet operation. Designed with sound-dampening features, they operate at low noise levels, making them suitable for environments where noise can be a concern, such as offices, hotels, or residential spaces.

Toshiba's advanced air filtration system further enhances indoor air quality. Integrated filters capture dust and allergens, creating a healthier indoor environment. This is particularly beneficial for individuals with allergies or respiratory concerns, as the system works to reduce airborne pollutants.

The units also offer flexible control options. With the availability of remote control or smart home integration, users can easily adjust settings to suit their preferences. Additionally, some models come with programmable timers, allowing for energy savings when the space is unoccupied.

Furthermore, these units are designed for reliability and ease of maintenance. Toshiba emphasizes durability in their construction, and the concealed installation not only enhances aesthetics but also protects the unit from potential damage. Routine maintenance can be performed efficiently, ensuring longevity and sustained performance.

In summary, Toshiba's Concealed Duck Type, Ceiling Type air conditioning units deliver a blend of innovative technology, energy efficiency, and contemporary design. With features like inverter technology, quiet operation, advanced air filtration, and flexible control options, they offer a compelling choice for those seeking comfort without compromising style. These units stand as a testament to Toshiba's commitment to quality and customer satisfaction in the HVAC industry.