Initializing the
Initializing the IPT1020-SD
CAUTION! If you initialize the IP telephone, all settings return to default.
1.Press ++++ROG (simultaneously).
2.Press 9RO ▲.
3.Press )% to initialize the telephone’s function settings (LED On = initialize, LED Off = don’t initialize). See
4.Press )% to initialize LCD contrast setting (LED On = initialize, LED OFF = don’t initialize).
5.Press )% to initialize the telephone’s IP network connection settings (LED On = initialize, LED Off = don’t initialize). See
6.Press +ROG again to complete the initialization process.
7.Go
IPT-to-IP Network Connection Instructions
1.Press ++++ROG (simultaneously).
2.Press , then press +ROGto select the Network Setting Mode.
3.Press )% to see if the DHCP server is in use or not. Press one of the following (normally, use : manual setting):
: manual setting, then press +ROG.
: auto setting by DHCP server, then press +ROG.
4.Press )%. Enter the IP address for this IPT and press +ROG. To enter the period in
an IP address, press the button on your dialpad (e.g., if the IP address is “192.168.1.241,” press ).
5.Press )%. Enter the subnet mask number and press +ROG. (e.g., if the subnet mask address is “255.255.255.0, press ).
96 | Strata CTX DKT/IPT Telephone 11/03 |
