ESV4 User’s Manual 13

Connect to the NVR

There are various ways you can connect to the NVR and below are the suggested methods for different network setup:

Through the browser from another PC on the network:

The NVR is placed in a network with a DHCP server: Connect to the NVR by using “NVR Device Search” Utility

The NVR is placed in a network without DHCP server (or you are connecting to it directly): Access the NVR with its default IP

Use Device Search Utility

If the NVR is placed in a corporate network or a local area network where a DHCP server is already presented, run the “NVR Device Search” utility from a computer that is on the same network and locate the NVR with its IP address that is assigned by the top-level DHCP server.

Page 13
Image 13
Toshiba ESV41T user manual Connect to the NVR, Use Device Search Utility