Toshiba GVMU/LVMU manual System Port to Port losses

Notes to Users

Step 4: Network Planning Information

Table A-3(continued)

Tones/		Frequency	Cadence	Meaning
Signal to:
	1.	20Hz	0.4s On 0.2s Off 0.4s On 3s Off	Ringing Signal Internal
	2.	20Hz	1s On 3s Off	Ringing Signal Internal
	3.	DTMF A	80 or 160mS	Voice Mail Answer
	4.	DTMF D	80 or 160mS	Voice Mail Disconnect
2 Wire extns	5. DTMF B		80 or 160mS	Voice Mail Recall
	6.	MWI Signal	0.9 ON/0.1s Off	Message Waiting Signal
	7.	20Hz	1s On 1 S Off	Recall Ringing Signal
	8.	1209Hz	2 bursts 0.16s On twice then 3s Off	External Call waiting
	9.	1209Hz	2 bursts 0.5s On twice then 3s Off	Internal Call waiting
	1.	350/440Hz	Continuous	Dial Tone
	2.	400(T1), 350/
			4 bursts of 0.125s T2-3s On	DND Stutter Dial Tone
	440Hz(T2)
			5 bursts of 0.1s 3s On	MW Stutter Dial Tone
	3.	350/440Hz
			0.4s On, 0.2s Off 0.4s On 2s Off	Ringing Back Tone
	4.	400/450Hz
			0.375s On/0.375s Off Repeated	Normal Extension Busy
	5.	400Hz
			0.375s On/0.375s Off Repeated	Busy-Extension in DND
	6.	400Hz
			0.375s On/0.375s Off Repeated	NU/Reorder Tone
Internal	7. 400Hz
			1s On	Executive override
general	8. 440Hz
			3 bursts of 0.1s	Entry Tone
	9.	350/440Hz
			T1-3 bursts of 0.25s, T2 0.25s three	Operation rejected. In call
	10. 1209Hz(T1),
			timess	Operation accepted In call
	500Hz(T2)
			3 bursts of 0.125s
	11. 350/440Hz			Progmg Operation
			2 bursts of 0.125s
	12. 2000Hz			accepted
			0.75s On	Prgmg Operation rejected
	13. 2000Hz
			1s On 2s Off Repeated	CFD stutter dial tone
	14. 350/440Hz
4-2.		System Port to Port losses.

Strata LVMU/GVMU Voice Processing System User Guide 7/06 81