10.8.43.3 Extended Self-test log sector

The following table defines the format of each of the sectors that comprise the Extended SMART Self-test log. The size of the self-test log is 1 sectors.

The Extended SMART self-test log sector shall support 48-bit and 28-bit addressing. All 28-bit entries contained in the SMART self-test log, defined under section 10.8.42.6.4 shall also be included in the Extended SMART self-test log with all 48-bit entries.

Extended Self-test log data structure

Byte

First sector

Subsequent sectors

0

Self-test log data structure revision number

Reserved

1

Reserved

Reserved

2

Self-test descriptor index (7:0)

Reserved

3

Self-test descriptor index (15:8)

Reserved

4-29

Descriptor entry 1

Descriptor entry 18n+1

30-55

Descriptor entry 2

Descriptor entry 18n+2

….

....

....

472-497

Descriptor entry 18

Descriptor entry 18n+18

498-499

Vendor specific

Vendor specific

500-510

Reserved

Reserved

511

Data structure checksum

Data structure checksum

n is the sector number within the log. The first sector is sector zero

This log is viewed as a circular buffer. The first entry will begin at byte 4, the second entry will begin at byte 30 and so on until the nineteen entry, that will replace the first entry. Then, the twenty entry will replace the second entry, and so on. If fewer than 18 self-tests have been performed by the device, the unused descriptor entries will be filled with zeroes.

10.8.43.3.1 Self-test descriptor index

The Self-test descriptor index indicates the most recent self-test descriptor. If there have been no self-tests, the Self-test descriptor index is set to zero. Valid values for the Self-test descriptor index are zero to 18.

10.8.43.3.2 Self-test log data structure revision number

The value of the self-test log data structure revision number is 01h.

Toshiba Corporation Digital Media Network Company

Page 129 of 157

© 2005, Copyright TOSHIBA Corporation All Rights Reserved