Toshiba P200 manual Removing Memory on Bottom Side

Optional Devices

Removing Memory on Bottom Side

The Slot A is reserved for main memory, the upper slot. Use the slot B for expanded memory, the bottom slot. If only one card is installed, use the slot A.

B

A

If you use the computer for a long time, the memory modules will become hot. In this case, let the memory modules cool to room temperature before you replace them.

To remove the memory module, make sure the computer is in boot mode then:

1.Be sure the power is off and all cables are disconnected from the computer.

Do not try to remove a memory module with the computer turned on. You can damage the computer and the module.

2.Turn the computer upside down and remove the battery and loosen the screw securing the memory module socket cover.

3.Slide your fingernail or a thin object under the cover and lift it off.

4.Push the latches to the outside to release the module. A spring will force one end of the module up.

5.Grasp the module and pull it out.

Do not touch the connectors on the memory module or on the computer. Debris on the connectors may cause memory access problems.

9-8 Satellite P200/Satellite Pro P200