Toshiba P200 Character display, For more information, refer to , About the HD DVD, On cleaning

Troubleshooting

Problem	Procedure
After making a call you	Make sure the tone or pulse selection in your
can't hear a ring	communications application is set correctly.
Communication is cut	The computer will automatically cut off
off unexpectedly	communication when connection with the carrier
	is not successful for a set time interval. Try
	lengthening this time interval.
A CONNECT display is	Check the error control setting in your
quickly replaced by NO communications application.
CARRIER
Character display	In data transmission, make sure the parity bit and
becomes garbled	stop bit settings correspond with those of the
during a communication remote computer.
	Check the flow control and communication
	protocol.
You cannot receive an	Check the "rings before auto answer" setting in
incoming call	your communications application.

If problems persist, contact your dealer.

DVD Super Multi drive supporting double layer disc recording

For more information, refer to Chapter 5, About the HD DVD.

ProblemProcedure

You cannot access a	Make sure the drive's drawer is securely closed.
disc in the drive	Press gently until it clicks into place.
	Open the drawer and make sure the disc is
	properly seated. It should lie flat with the label
	facing up.
	A foreign object in the drawer could block laser
	light from reading the disc. Make sure there is no
	obstruction. Remove any foreign object.
	Check whether the disc is dirty. If it is, wipe it with
	a clean cloth dipped in water or a neutral cleaner.
	See the Media care section in Chapter 4 for details
	on cleaning.

Satellite P200/Satellite Pro P200 10-13