Toshiba P200 manual TV output signal, Refer also to your USB device’s documentation

Troubleshooting

USB

Refer also to your USB device’s documentation.

	Problem	Procedure
	USB device does not	Check for a firm cable connection between the
	work	USB ports on the computer and the USB device.
		Make sure the USB device drivers are properly
		installed. Refer to your Windows documentation
		for information on checking the drivers.
		If problems persist, contact your dealer.
TV output signal

Problem	Procedure
Display on TV is poor	Make sure the TV type is correct for your area:
	NTSC (US) or PAL (Europe).
No display	Try adjusting the contrast and brightness controls
	on the external monitor.
	Press hotkeys Fn + F5 to change the display.
	Refer to Chapter 6, The Keyboard.
	If problems persist, contact your dealer.

If you turn the computer off in Sleep Mode while the display is on a TV, the computer will select either the internal LCD or an external computer CRT as the display device the next time it is switched on.

LAN

ProblemProcedure

Cannot access LAN or the Wake up on LAN feature does not work

Check for a firm cable connection between the LAN hub.

Make sure the AC adapter is connected. You cannot access a LAN using the computer's battery power.

If problems persist, consult your LAN administrator.

Satellite P200/Satellite Pro P200 10-11