Toshiba P200 manual Sound system, Pointing device

Troubleshooting

	Problem	Procedure
	No display	Try adjusting the contrast and brightness controls
		on the external monitor.
		Press hotkeys Fn + F5 to change the display
		priority and make sure it is not set for the internal
		display.
	Display error occurs	Check that the cable connecting the external
		monitor to the computer is attached firmly.
		If problems persist, contact your dealer.
	Monitor goes into	Check your monitor specification. It might not
	panning mode	support the selected resolution and refresh rate.
		The resolution on the monitor might go into
		panning mode when wide screen resolution is
		selected. Refer to Appendix B, Display Modes.
Sound system
	Problem	Procedure
	No sound is heard	Adjust the volume control dial.
		Check the software volume settings.
		If appropriate, make sure the headphone
		connection is secure. Check Windows Device
		Manager and ensure the sound function is
		enabled and that settings for I/O address,
		interrupt level and DMA are correct for your
		software and do not conflict with other hardware
		devices that you have connected to the
		computer.
		If problems persist, contact your dealer.

Pointing device

If you are using a USB mouse, also refer to the USB section in this chapter and to your mouse documentation.

TouchPad/Dual Mode Pad

Problem

On-screen pointer does not respond to Pad operation

Procedure

The system might be busy. If the pointer is shaped as an hourglass, wait for it to resume its normal shape and try again to move it. You may also press Fn + F9 to enable the TouchPad/Dual Mode Pad and then try again to move it.

Satellite P200/Satellite Pro P200 10-9