Toshiba P200 manual Properties menu, Settings, AutoRun Mode

Operating Basics

Do not use the Country/Region Select function in the Modem setup utility in the Control Panel if the function is available. If you change the Country/ Region in the Control Panel, the change may not take effect.

2. The Region Selection icon appears on the Windows Task Bar.

The Region Selection icon

3.Click the icon with the primary mouse button to display a list of regions that the modem supports. A sub menu for telephony location information will also be displayed. A check will appear next to the currently selected region and telephony location.

4.Select a region from the region menu or a telephony location from the submenu.

■When you click a region it becomes the modem's region selection, and the New Location for telephony will be set automatically.

■When you select a telephony location, the corresponding region is automatically selected and it becomes the modem's current region setting.

Properties menu

Click the icon with the secondary mouse button to display the following menu.

The properties menu

Settings

You can enable or disable the following settings:

AutoRun Mode

Region Select Utility starts automatically when you start up the operating system.

Open the Dialling Properties dialogue box after selecting region.

The dialling properties dialogue box will be displayed automatically after you select the region.

4-14 Satellite P200/Satellite Pro P200