Toshiba P200 manual Password, Link IEEE1394, Wireless LAN, Monitor, ProblemProcedure

Troubleshooting

Password

	Problem	Procedure
	Cannot enter	Refer to Chapter 7, Power and Power-Up Modes.
	password
i.LINK (IEEE1394)
	Problem	Procedure
	i.LINK device does not	Make sure the cable is securely connected to the
	function	computer and to the device.
		Make sure the device's power is turned on.
		Reinstall the drivers. Open the Windows Control
		Panel and double-click the Add New Hardware
		icon. Follow the on-screen directions.
		Restart Windows.
		If problems persist, contact your dealer.

Wireless LAN

If the following procedures do not restore LAN access, consult your LAN administrator. For more information on wireless communication, refer to Chapter 4, Operating Basics.

ProblemProcedure

Cannot access Wireless Make sure the computer's wireless

LAN	communication switch is set to on.
	Use the ConfigFree program that comes pre-
	installed in your computer to see LAN status.
	If problems persist, consult your LAN
	administrator.

Monitor

Refer also to Chapter 9, Optional Devices, and to your monitor’s documentation.

ProblemProcedure

Monitor does not turn on Make sure that the external monitor's power switch is on. Confirm that the external monitor's power cable is plugged into a working power outlet.

10-8 Satellite P200/Satellite Pro P200