Epson Z8250NL manual Entering the Password, Turn on Power On Protect, Turn on Users Logo Protect

Security Functions 46

q	• If Password Protect is already activated, you must enter the password.
	If the password is entered correctly, the Password Protect setting menu is
	displayed. s "Entering the Password" p.46
	• When the password is set, stick the Password protect sticker in a visible
	position on the projector as a further theft-deterrent.

B Turn on "Power On Protect".

(1)Select Power On Protect, and then press the [Enter] button.

(2)Select On, and then press the [Enter] button.

(3)Press the [Esc] button.

C Turn on "User's Logo Protect".

(1)Select User's Logo Protect, and then press the [Enter] button.

(2)Select On, and then press the [Enter] button.

(3)Press the [Esc] button.

D Turn on "Network Protect".

(1)Select Network Protect, and then press the [Enter] button.

(2)Select On, and then press the [Enter] button.

(3)Press the [Esc] button.

E Set the Password.

(1)Select Password, and then press the [Enter] button.

(2)The message "Change the password?" is displayed, select Yes and then press the [Enter] button. The default setting for the Password is "0000". Change this to your own desired password. If you select No, the screen shown in step 1 is displayed again.

(3)While holding down the [Num] button, enter a four digit number using the numeric buttons. The number entered is displayed as "*

* * *". When you enter the fourth digit, the confirmation screen is displayed.

Remote Control

(4)Re-enter the password.

The message "Password accepted." is displayed.

If you enter the password incorrectly, a message is displayed prompting you to re-enter the password.

Entering the Password

When the Password entry screen is displayed, enter the password using the numeric buttons on the remote control.

Procedure

While holding down the [Num] button, enter the password by pressing the numeric buttons.

When you enter the correct password, projection begins.