Epson Z8350WNL, Z8455WUNL, Z8255NL, Z8150NL Select the zoom factor from the zoom setting screen

Saving a User's Logo

D Move the box to select the part of the image to use as the

User's Logo.

Using the Remote Control Using the Control Panel

q Your User’s Logo image can have a resolution up to 400 ^ 300.

44

F Select the zoom factor from the zoom setting screen.

400% is displayed only when using PowerLite Pro Z8450WUNL/Z8455WUNL.

G When the message "Save this image as the User's Logo?" is displayed, select "Yes".

	The image is saved. After the image has been saved, the message
	"Completed." is displayed.
q	• To use the saved user's logo as the screen image, set it in the Display
	settings under the Extended menu. s p.67
	• Saving the user's logo may take approximately 15 seconds. Do not use the
	projector or any connected equipment while it is saving, otherwise
	malfunctions may occur.

E When "Select this image?" is displayed, select "Yes".