Epson Z8450WUNL Sub Menu Function AMX Device Discovery, Crestron RoomView, Bonjour, Epson Message

Network Menu 83

Sub Menu	Function
AMX Device Discovery	When the projector is connected to a network, set this to On to allow the projector to be detected by AMX Device Discoveryg. Set
	this to Off if you are not connected to an environment controlled with a controller from AMX or AMX Device Discovery.
Crestron RoomView	Set this parameter to On only when using Crestron RoomView® to monitor and control the projector over a network. Normally,
	leave this parameter set to Off. s "About Crestron RoomView®" p.136
	Changes in projector settings take effect upon restarting.
	The following functions cannot be used when it is set to On.
	• Web Control
	• Message Broadcasting (EasyMP Monitor plugin)
Bonjour	To connect to the network by Bonjour, set it to On. For an explanation of the Bonjour service, see the Apple Web site.
	http://www.apple.com/
EPSON Message	You can switch the EPSON Message Broadcasting function to enable or disable.
Broadcasting	Download the software and the User’s Guide from the following website.
	http://www.epson.com
	You can download Message Broadcasting and its Operation Guide from the following Web site.
	http://www.epson.com