About Crestron RoomView®

Using the tools window

The following window will be displayed if the Tools tab is clicked in the operation window. This window is used to change the settings in the projector that is currently connected.

ACrestron Control

Makes settings for Crestron® central controllers.

BProjector

The following items can be set.

Item

Function

 

 

Projector Name

Enter a name to differentiate the projector that is

 

currently connected from other projectors on

 

the network. (The name can contain up to 15

 

single-byte alphanumeric characters.)

 

 

139

Item

Function

 

 

Location

Enter an installation location name for the

 

projector that is currently connected on the

 

network. (The name can contain up to 32

 

single-byte alphanumeric characters and

 

symbols.)

 

 

Assigned To

Enter a user name for the projector. (The name

 

can contain up to 32 single-byte alphanumeric

 

characters and symbols.)

 

 

DHCP

Select the Enabled check box to use DHCP. You

 

cannot set static IP addresses if DHCP is enabled.

 

 

IP Address

Enter the IP address to assign to the currently

 

connected projector.

 

 

Subnet Mask

Enter a subnet mask for the projector that is

 

currently connected on the network.

 

 

Default Gateway

Enter the gateway address for the currently

 

connected projector.

 

 

Send

Click this button to commit changes made to the

 

Projector.

 

 

Page 138 Page 140
Page 139
Image 139
Epson Z8255NL, Z8455WUNL, Z8350WNL, Z8150NL, Z8250NL, Z8450WUNL manual Using the tools window, 139
Page 138 Page 140
Top Page Image Contents