Epson Z8150NL, Z8455WUNL Snmp menu, Address, However, the following IP addresses cannot be used

Network Menu 87

SNMP menu

To use SNMP to monitor the projector, you need to install the SNMP manager program on your computer. SNMP should be managed by a network administrator.

Sub Menu	Function
SNMP	Set this parameter to On when using SNMPg to monitor the projector.
Trap IP Address 1/Trap IP	When SNMP is set to On, you can set up to two IP addresses as SNMP trap notification destinations.
Address 2	You can input a number from 0 to 255 in each field of the address.
	However, the following IP addresses cannot be used.
	127.x.x.x, 224.0.0.0 to 255.255.255.255 (where x is a number from 0 to 255)
Community Name	Set the community name of SNMP. You can enter up to 32 single-byte alphanumeric characters.