Epson Z8450WUNL, Z8455WUNL, Z8255NL, Z8350WNL, Z8150NL, Z8250NL manual 167

Adjusting the Projected Image

C Use the [h] button on the remote control or the [w/ ], [v/ ], [</ ], and [>/ ] buttons on the control panel to select the area you want to adjust, and then press the [Enter] button.

When selecting a corner, you can adjust the two sides next to the corner.

167

D To adjust the shape, use the [h] button on the remote control or the [w/ ], [v/ ], [</ ], and [>/ ] buttons on the control panel.

If the triangle in the direction you are adjusting the shape turns gray, as shown in the screenshot below, you cannot adjust the shape any further in that direction.

q If you press the [Default] button while adjusting, the value that you are adjusting is reset to the default.