Epson Z8150NL, Z8255NL Sub Menu Function, Search Access Point, Channel, Ssid Display, IP Address

Network Menu 75

Sub Menu	Function
SSID	Enter an SSID. When an SSID is provided for the wireless WLAN network in which the projector participates, enter the SSID.
	You can enter up to 32 single-byte alphanumeric characters.
Search Access Point	When Connection Mode is set to Advanced, you can search for surrounding access points, and set the SSID to be connected from
	those access points. Depending on the access point settings, they may not be displayed in the list. You must set security separately.
	s p.76
Channel	You can select the channels used to connect in Quick mode. If interference from other signals occurs, use a different channel.
SSID Display	To prevent the SSID from being displayed on the LAN Standby screen, set this to Off.
DHCP	You can set whether or not (On/Off) to use DHCPg.
	If this is set to On you cannot set any more addresses.
IP Address	You can input the IP addressg assigned to the projector.
	You can input a number from 0 to 255 in each field of the address. However, the following IP addresses cannot be used. 0.0.0.0,
	127.x.x.x, 224.0.0.0 to 255.255.255.255 (where x is a number from 0 to 255)
Subnet Mask	You can input the Subnet Maskgfor the projector. You can input a number from 0 to 255 in each field of the address. However, the
	following subnet masks cannot be used.
	0.0.0.0, 255.255.255.255
Gateway Address	You can input the IP address for the gateway for the projector.
	You can input a number from 0 to 255 in each field of the address. However, the following Gateway addressesg cannot be used.
	0.0.0.0, 127.x.x.x, 224.0.0.0 to 255.255.255.255 (where x is a number from 0 to 255)
IP Address Display	To prevent the IP address from being displayed on the LAN Standby screen, set this to Off.
Region Code	This is a specific string of the wireless LAN module.