Epson Z8450WUNL manual Name Function BNC input port, Cable holder, Power inlet, Remote port, Port

Part Names and Functions 17

Name	Function
2 BNC input port	For analog RGB signals from a computer and
	component video signals from other video
	sources.

3Video input port For composite video signals from video sources.

4S-Video input port For S-Video signals from video sources.

5 Cable holder	When a thick heavy HDMI cable is connected to
	the HDMI input port, run a commercially available
	cable tie through this holder to prevent the cable
	from disconnecting.

6Computer input port For analog RGB signals from a computer and component video signals from other video sources.

7	Power inlet	Connects to the power cable.
		The shape may differ depending on your projector
		model.
8	Remote port	Connects the optional remote control cable set
		and inputs signals from the remote control. When
		the remote control cable is plugged into this port,
		the remote receiver on the projector is disabled.
9	RS-232C port	When controlling the projector from a computer
		or controller, connect it with an RS-232C cable.
		This port is for control use and should not
		normally be used. s p.133

10Wireless LAN unit Connects to the optional wireless LAN unit.

port s p.190

Name Function

11Monitor Out port Outputs to an external monitor the analog signal from the computer connected to the Computer input port or the BNC input port. This is not available for component video signals or other signals being input to any port other than the Computer input port or the BNC input port.

s p.185

12 SDI port	For SDI signals from a video equipment.
(PowerLite Pro
Z8450WUNL/
Z8455WUNL only)

13HDMI2 input port For video signals from HDMI compatible video

equipment and computers. This projector is compatible with HDCPg signals.

14 LAN port	Connects a LAN cable to connect to a network.
	s p.185