Epson Z8350WNL manual 158, Press the Esc button to end the test pattern, Rgbcmy s p.169, Auto Iris

Adjusting the Projected Image 158

B Press the [h] button on the remote control in the [r] direction or press the [Enter] button on the control panel to switch the test pattern.

To display the previous image, press the [h] button on the remote control in the [l] direction.

Using the Remote Control Using the Control Panel

The following adjustments can be made while the test pattern is be- ing displayed.

Top Menu	Sub Menu/Items
Image menu	Color Mode s p.34
	Abs. Color Temp.
	Advanced
	- Gamma*1 s p.169
	- RGB
	- RGBCMY s p.169
	Auto Iris
	Reset
Signal menu	Auto Setup
Settings menu	Geometric Correction s p.161
Extended menu	Multi-Projection
	- Brightness Level*2
	- Edge Blending s p.178
	- Multi-screen s p.180

*1 Except for custom settings of gamma

*2 Not available on PowerLite Pro Z8150NL

q To set menu items that cannot be set while the test pattern is being displayed or to fine-tune the projected image, project an image from the connected device.

C Press the [Esc] button to end the test pattern.