Epson Z8455WUNL, Z8255NL, Z8350WNL, Z8150NL, Z8250NL, Z8450WUNL manual Quick Corner, 162

Adjusting the Projected Image 162

•Point Correction

Corrects slight distortion which occurs partially, or adjusts the screen position in an overlapping area when projecting from multiple projectors. s "Point Correction" p.176

Quick Corner, H/V-Keystone, Arc Correction, and Point Correction cannot be performed at the same time. Select the correction method from Geometric Correction in the configuration menu. The default setting for Geometric Correction is set to H/V-Keystone, so when [w/ ], [v/ ], [</ ], and [>/ ] buttons are pressed, H/V-Keystone correction is carried out.

Because Quick Corner, H/V-Keystone, Arc Correction, and Point Correction can be carried out while projecting a test pattern, you do not need to make preparations by connecting a computer or other equipment.

Quick Corner

Procedure

A During projection, press the [Menu] button. Select Settings menu - "Geometric Correction" and then press the [Enter] button. s "Using the Configuration Menu" p.55

Using the Remote Control Using the Control Panel