Epson Z8255NL, Z8455WUNL, Z8350WNL, Z8150NL Changing the Projected Image, Using the Remote Control

Changing the Projected Image

Changing the Projected Image

You can change the projected image in the following two ways.

•Changing by Source Search

The projector automatically detects signals being input from connected equipment, and the image being input from the input port is projected.

•Changing directly to the target image

You can use the remote control buttons to change to the target input port.

25

When the [Search] or [Source Search] button is pressed, a search is made for input ports to which video signals are being input in the following order. (Input ports where no image signal is being input are skipped.)

Automatically Detect Input Signal and Change the Projected Image (Source Search)

You can project the target images quickly by pressing the [Search] or [Source Search] button because it will switch only to images from input ports to which image signals are being input.

Procedure

When your video equipment is connected, start playback before beginning this operation. When two or more pieces of equipment are connected, press the [Search] or [Source Search] button until the target image is projected.

Using the Remote Control Using the Control Panel

*PowerLite Pro Z8450WUNL/Z8455WUNL only

When switching to LAN, images from computers connected through the network are projected.