Epson Z8255NL, Z8455WUNL, Z8350WNL, Z8150NL, Z8250NL, Z8450WUNL manual Problems relating to images, 103

Problem Solving 103

Problems relating to images

No images appear

Check	Remedy
Did you press the [t] button?	Press the [t] button to turn the power on.
Are the indicators switched off?	The power cable is not connected correctly or power is not being supplied normally.
	Connect the projector's power cable correctly.
	Check that your electrical outlet or power source is functioning correctly.
Is Shutter active?	Press the [Shutter] button on the remote control to cancel Shutter. s p.39
Are the configuration menu settings correct?	Reset All of the settings. s Reset Menu - Reset All p.91
Is the projected image completely black?	Some input images, such as screen savers, may be completely black.
Only when projecting computer images
Is the image signal format setting correct?	Change the setting according to the signal for the connected equipment. s Signal Menu - Video
Only when projecting images from a video source	Signal p.62

Moving images are not displayed (only the moving image portion turns black).

Check	Remedy
Is the computer's image signal being output to the LCD and	Change the image signal to external output only. s Check your computer's documentation.
the monitor?
Only when projecting images from a laptop computer
or a computer with a built-in LCD screen

Projection stops automatically

Check	Remedy
Is Sleep Mode set to On?	Press the [t] button to turn the power on. If you do not want to use Sleep Mode, change the setting to
	Off. s Extended Menu - Operation - Sleep Mode p.67