Epson Z8450WUNL, Z8455WUNL, Z8255NL, Z8350WNL manual Adjusting the Tilt of the Projected Image, 161

Adjusting the Projected Image 161

B To zoom, use the [h] button on the remote control or the arrow buttons on the back of the projector as shown below.

C When you’re done, press the [Esc] button on the remote control or on the back of the projector.

Adjusting the Tilt of the Projected Image

When setting up on a desk, adjust the horizontal tilt of the projector with its front and rear feet.

Correcting Distortion in the Projected Image

There are four methods of correcting distortion in projected images as below.

•Quick Corner

This allows you to manually correct each of the four corners of the projected image separately. s "Quick Corner" p.162

We recommend using Quick Corner to accurately adjust keystone distortion.

•H/V-Keystone

This allows you to manually correct distortion in the horizontal and vertical directions independently. You can perform easy H/V-Keystone

corrections by using the [w/ ] [v/ ] [</ ] and [>/ ] buttons on the projector's control panel. s "H/V-Keystone"p.164

•Arc Correction

Fine adjustment of the curved distortion caused by slack or shrinkage of the screen. s "Arc Correction" p.166