Part Names and Functions 15
Rear
9Interface cover
open/close switch
Opens and closes the interface cover. sp.191
10 Ceiling mount
attachment points
(Four points)
Attach the optional ceiling mount here when
suspending the projector from a ceiling. sp.150,
p.195
Name Function
Name Function
1Air exhaust vent
(Lamp cover)
Exhaust vent for air used to cool the projector
internally. Also, open this cover to replace the
projector's lamps.
Caution
Do not place objects that may become warped or
otherwise affected by heat near the air exhaust vent
and do not put your face or hands near the vent while
projection is in progress.
2Rear foot When set up on a desk, turn to extend and retract
to adjust the horizontal tilt.
The rear adjustable feet can be removed when the
projector is installed on a ceiling. sp.192
3Lamp cover open
tab
Use these tabs to open the lamp cover. sp.119