Epson Z8455WUNL, Z8255NL, Z8350WNL manual Setting the projector ID, Checking the Projector ID, 174

Settings for Multiple Projectors 174

q	• Operation using the remote control is possible only for projectors that are
	within the operating range of the remote control. s "Operating range of
	remote control" p.23
	• When Remote Control Type is set to Simple from Operation in the
	configuration menu, you cannot set the remote control ID. s p.67
	• IDs are ignored when the projector ID is set to Off or the remote control ID
	is set to 0.

Setting the projector ID

Procedure

A During projection, press the [Menu] button and select

Extended - "Multi-Projection" from the configuration menu. s "Using the Configuration Menu" p.55

Remote Control

B C

D

Select "Projector ID", and then press the [Enter] button.

Select of one of the numbers from 1 to 9 to use as the ID and then press the [Enter] button.

Press the [Menu] button to close the configuration menu.

Checking the Projector ID

Use the following procedure to check the projector ID.