Epson Z8455WUNL, Z8255NL, Z8350WNL, Z8150NL, Z8250NL, Z8450WUNL manual Connection Setup Method, 144

Making a WPS (Wi-Fi Protected Setup) Connection with a Wireless LAN Access Point 144

Making a WPS (Wi-Fi Protected Setup) Connection with a Wireless LAN Access Point

There are two methods for setting WPSg.

•Push Button Method

SSID and security are set automatically when the [Enter] button is pressed on the projector's control panel and the dedicated button on the access point equipment. This method is recommended when the projector and access point are close together.

•PIN Code Method

SSID and security are set automatically by inputting an 8-digit code that was assigned to the projector from the computer to the access point in advance. Make connection settings between the computer and the access point in advance. For details on how to make this connection, refer to the manual provided with the access point. This method is recommended when the projector is mounted on the ceiling.

q Refer to the documentation for the access point device and to the following section when using any connection method other than WPS. s "Wireless LAN Menu" p.74

Connection Setup Method

Procedure

A During projection, press the [Menu] button and select "Network" - "Network Configuration" from the configuration menu.

The Network Configuration screen is displayed.